 |
Noise is not always a the primary concern for many people. Rather, keeping the passenger compartment cool in the summer and toasty warm in the winter is more important.
We offer a variety of high performance, lightweight sheet and liquid based thermal control materials to meet or exceed your expectations.
Please feel free to contact us anytime to discuss in detail the proper application of thermal control products in you car, truck or recreational vehicle. |
 |
TG-1
Thermal Control Compound
TG-1 is a thermal insulating coating made up of air filled glass beads held in suspension by a high temp latex acrylic binder. This advanced material yields superior insulating capabilities.
TG-1 is a premixed composite consisting of 80% microscopic air filled glass beads. These precisely manufactured beads are held in suspension by a high-grade latex acrylic emulsion.
More Information >>
|
 |
INSULATOR-12
Thermo-Acoustic Blanket
The Insulator thermo-acoustic blanket will guard against the intrusion of heat, sound, vibration and airflow. The insulator consists of an all natural cotton fiber layer with surface layers of foil.
The insulator provides up to 50% greater R-value than other reflective insulation materials.
More Information >> |
 |
VB-TS
Thermo-Acoustic Liner
VB-TS is an adhesive backed, low profile combination thermal barrier and acoustic absorber. It reflects thermal energy and absorbs mid-band and high frequency noise.
The 3/8" high temperature acoustic foam traps air and acts as an insulator while the Aluminum Mylar surface scrim reflects engine heat. Additionally, the foam will trap and dissipate mechanical noise generated by engine components.
More Information >> |
 |
VB-TSM
Engine / Generator Box Liner
VB-TSM is the perfect product for severe noise control problems. It is especially effective for RV and marine engine compartments and generator housings. VB-TSM is a unique, high performance composite material incorporating two layers of acoustical foam, a loaded vinyl barrier and an aluminized mylar thermally reflective skin.
More Information >> |
 |
SG-1
Spray Application Tool
The SG-1 spray application tool is a 1 quart, internal mix, siphon feed spray gun designed to deliver high solids vibration damping and thermal control coatings. The SG-1 features an aluminum 1quart cup and 0.5” interior diameter draw tube to ensure maximum material flow.
More Information >> |
|
