TG-1 Thermal Control Coating

ThermaGuard is a thermal insulating coating made up of air filled glass beads held in suspension by a high temp latex acrylic binder. This advanced material yields superior insulating capabilities.

ThermaGuard is a premixed composite consisting of 80% microscopic air filled glass beads. These precisely manufactured beads are held in suspension by a high-grade latex acrylic emulsion. This combination yields a lightweight, pliable product, which expands and contracts with the surface to which it is applied. Two standard coats (15 mil ea.) will yield an R12 equivalent insulation value.

ThermaGuard is available in l gallon and 5 gallon containers. Using a 15-mils application of ThermaGuard, one gallon will cover approximately 50-60 square feet.

ThermaGuard is suitable for just about any insulating application. Typical applications are vehicle firewalls, floors and roofs, engine compartments, AC ducting and walls. Basically anywhere you would want to insulate from heat or cold ThermaGuard can be used.

TG-1 ThermaGuard applied onto the floorpan over exhaust components in a Willy's coupe street rod.

TG-1 ThermaGuard applied onto the underside of the roof in a Willy's coupe street rod.

TG-1 ThermaGuard applied onto an air intake pipe to keep the charge air as cool as possible.

SG-1

The SG-1 spray application tool is a 1 quart, internal mix, siphon feed spray gun designed to deliver high solids vibration damping and thermal control coatings. The SG-1 features an aluminum 1quart cup and 0.5” interior diameter draw tube to ensure maximum material flow. Additional features include delivery rate adjustment, a press forged brass handle and 0.250” nozzle opening. The spray pattern is conical with heavy particle spray. The result is product where you need it with minimal overspray.

<< Back