| A power converter can be the most important part of an electronics display system and we have designed the APS line of power converters to produce the cleanest power possible to meet your display needs. To further enhance the overall performance of an APS power supply, Zero Noise offers a variety of accessories to improve reserve capacity, installation, monitoring and connection. Please feel free to contact PFUSA with any questions or comments about choosing the right product for your application. |
|
APS-HK4
The APS Four Gauge Cable Kit provides all of the critical components necessary for installation of any APS Power Supply. It features a unique “quick-release” connector allowing it to be quickly and easily plugged or unplugged from any vehicle.
Included in the kit are two cable assemblies. The first assembly will be connected to the vehicle battery. The second assembly will be connected to your APS power supply. Once the kit is installed into a vehicle, the APS power supply can be quickly attached or removed by utilizing the two quick real ease connectors. Proper polarity of the cables at the connector is automatically ensured. They only fit together correctly.
PART: APS-HK4
Wire: 4' 4 Gauge Black / 4' 4 Gauge Red
Terminals: 4 Gauge copper ring
Connector: High Current Disconnect (120amp)
Cost: $50.00 |
|
CAP-0.5
CAP-1.0:
|
CAP-0.5 & CAP-1.0
A Power Flow USA CAP provides a current reserve that will react much faster than the battery in your vehicle or mobile electronics display. Audio components will receive smoother, more stable power resulting in increased system performance. Power Flow USA CAP's can also be connected in parallel to our APS power converters in applications where automotive batteries cannot be used. Power Flow USA capacitors have the lowest ESR which means the highest discharge current.
PART: CAP-0.5 & CAP-1.0
CAP-0.5
Dimensions: 2.5" Diameter x 4.75" Height +/- 2% Cost: $39.95
CAP-1.0:
Dimensions: (Two Sizes) 3" Diameter x 8.75" or 5.625" Height +/- 2%
Cost: $66.50 |
|
|
APS-EC8
The APS EC8 is an eight foot polarized extension cord that will work with the APS 75 Power Converter and the APS Wall Receptacle.
PART: APS-EC8
Cost: $14.95 |
|
|
APS-IQ4
The APS IQ4 Smart Charge Controller offers automatic charging control for APS Power Converters, providing longer and safer use of your systems battery. The IQ4 Controller allows the APS Power Converter to operate as a 3 stage “smart charger.” This gives the end user the benefit of Bulk, Absorption and Float stage charging, increasing the charging capacity of the APS Power Converter and decreasing charge times insuring proper and safe battery charging and minimizing and over charging. This “smart technology” monitors the battery levels at all times. Please note that the APS90 is only a two stage unit and the APS 100 is not compatible with the IQ4 module. If the APS voltage remains in the long term stage for more than seven days, the IQ4 will automatically deliver a boost charge for a predetermined period of time then automatically return to the normal float stage.
PART: APS-IQ4
Cost: $25.00 |
|
|
ITS-30R
The ITS-30R is a relay-based automatic transfer switch rated for 30A power systems, and provides switching between two separate power sources. Use in conjuction with another ITS unit for additional power source switching.
MAX. POWERCORD SIZE: 30A
MAX. GENERATOR: 4 KW MAX. MAIN BREAKER: 30A 1P
CASE MATERIAL: Durable Plastic
WIRING: Hard Wire
DIMENSIONS: 9.3" x 7.6" x 4.3"
WEIGHT: 2 lbs.
PART: ITS-30R
Cost: $55.00 |
|
|
ITS-50R
The ITS-50R is a relay-based transfer switch for 50A systems and features an easy-to-wire bridge. The ITS-50R provides switching between two separate power sources. Use in conjuction with another ITS for additional power source switching.
MAX. POWERCORD SIZE: 50A
MAX. GENERATOR: 12 KW
MAX. MAIN BREAKER: 50A 2P
CASE MATERIAL: Durable Plastic
WIRING: Bridge
DIMENSIONS: 9.3" x 7.6" x 4.3"
WEIGHT: 3 lbs.
PART: ITS-50R
Cost: $115.00 |
|
|
ITS-100R
The ITS-100R is a relay-based transfer switch for 100A systems and features an easy-to-wire bridge. The ITS-100R provides switching between two separate power sources. Use in conjuction with another ITS for additional power source switching.
MAX. POWERCORD SIZE: 100A
MAX. GENERATOR: 24 KW
MAX. MAIN BREAKER: 100A
CASE MATERIAL: Steel
WIRING: Bridge
DIMENSIONS: 10" x 12" x 4"
WEIGHT: 15 lbs.
PART: ITS-100R
Cost: $299.00 |
|
|
APS Wall Receptacle
The APS Wall Receptacle eliminates the need to cut the existing end off of the APS 75 Power Converter and potentially cause a hazardous electrical situation.
PART: APS Wall Receptacle
Cost: $2.50 |
|
| Power Supply Accessories |
Manuals / Installation Instructions |
Technical Data: |
|
“We are happy to supply you with accurate product data.
For any tech question not addressed in these documents, e-mail our tech department.
All manuals, installation and technical data sheets are available as downloadable PDF files.
Don't have Adobe Acrobat?  |
|
