TG-1

TG-1 is a thermal insulating coating made up of air filled glass beads held in suspension by a high temp latex acrylic binder. This advanced material yields superior insulating capabilities. TG-1 is a premixed composite consisting of 80% microscopic air filled glass beads.

These precisely manufactured beads are held in suspension by a high-grade latex acrylic emulsion. This combination yields a lightweight, pliable product, which expands and contracts with the surface to which it is applied. Two standard coats (15 mil ea.) will yield an R12 equivalent insulation value. TG-1 is available in l gallon and 5 gallon containers. Using a 15-mil application of TG-1, one gallon will cover approximately 50-60 square feet.

TG-1 is suitable for just about any insulating application. Basically anywhere you would want to insulate from heat or cold TG-1 can be used.

SG-1

The SG-1 spray application tool is a 1 quart, internal mix, siphon feed spray gun designed to deliver high solids vibration damping and thermal control coatings. The SG-1 features an aluminum 1quart cup and 0.5” interior diameter draw tube to ensure maximum material flow. Additional features include delivery rate adjustment, a press forged brass handle and 0.250” nozzle opening. The spray pattern is conical with heavy particle spray. The result is product where you need it with minimal overspray.

<< Back