 |
Zero Noise offers a wide variety of damping products ideal for sheet metal, plastic, fiberglass and wood. They can be used to eliminate vibration and the associated noise in marine applications. How do these products work? They operate as "visco-elastic" dampers by converting vibration energy into low level heat. As an enhancement product to marine audio systems, they can yield stunning results.
Vibration damping materials allow your audio system to play with much more detail and clarity. Resonating panels can be tamed, increasing the solid feel of the craft.
Our VB-1X vibration damping compound may also be applied to the inside of automotive loudspeaker enclosures whether fiberglass, plastic or wood to increase overall output by 1 to 1.5db.
Please feel free to contact our technical support department should you have any questions or comments regarding the installation or application of these products. |
 |
VB-1X is an air curing, liquid damping compound. Its combination of silica-mica, ceramics and an advanced chemical binder greatly reduces structural resonance by converting vibration into “viscous” friction or low level heat.
More Information >> |
 |
VB-2 is a flexible, odorless and lightweight mineral filled vinyl-copolymer formulated to handle the demanding extremes of aircraft vibration and noise control. It has twice the damping and less than half the weight of asphalt damping materials and the ability to handle continuous temperatures to 250 degrees.
More Information >> |
 |
VB-2HD
For heavy duty damping requirements VB-2HD is the perfect material. At a mere .43 pounds per square foot VB-2HD out damps other materials that are up to 4 times heavier. How does it work? Both VB-2 & VB-2HD operate as visco-elastic dampers. By heavily loading silica and quartz into a flexible vinyl carrier VB-2 efficiently converts vibration energy into low level heat.
More Information >>
|
 |
V-Max These durable damping pads are constructed of an advanced, non-curing butylene rubber bonded to a thin layer of black aluminum. Applying VMAX to steel, plastic and fiberglass surfaces will decrease structural resonance, producing a tighter, quieter and more comfortable passenger compartment.
More Information >> |
 |
VB-FD More and more composite materials are being used in structures to reduce weight. Sandwich panels constructed with honeycomb cores or cores of rigid plasticfoam or balsa wood and glass reinforced plastic skins have been succesfully used to build ships as large as minesweepers.
More Information >> |
 |
SG-1
The SG-1 spray application tool is a 1 quart, internal mix, siphon feed spray gun designed to deliver high solids vibration damping and thermal control coatings. The SG-1 features an aluminum 1quart cup and 0.5” interior diameter draw tube to ensure maximum material flow.
More Information >> |
 |
VMAXAPP
The VMAXAPP tool makes installing the VMAX vibration damping sheet easier than ever. The VMAXAPP tool is constructed of soft plastic and has been designed to ensure a good bond between the VMAX material and the vibrating surface.
More Information >> |
|
