Marine applications include but are not limited to: engine box insulation, and berthing quarter insulation. Basically anywhere you would want to insulate from heat or cold ZN's products can be used.

TG-1

ThermaGuard is a thermal insulating coating made up of air filled glass beads held in suspension by a high temp latex acrylic binder. This advanced material yields superior insulating capabilities. ThermaGuard is a premixed composite consisting of 80% microscopic air filled glass beads.

More Information >>

VB-TS is an adhesive backed, low profile combination thermal barrier and acoustic absorber. It reflects thermal energy and absorbs mid-band and high frequency noise.

The 3/8" high temperature acoustic foam traps air and acts as an insulator while the Aluminum Mylar surface scrim reflects engine heat. Additionally, the foam will trap and dissipate mechanical noise generated by engine components.

More Information >>

VB-TSM is the perfect product for severe noise control problems. It is especially effective for RV and marine engine compartments and generator housings. VB-TSM is a unique, high performance composite material incorporating two layers of acoustical foam, a loaded vinyl barrier and an aluminized mylar thermally reflective skin.

More Information >>

SG-1

The SG-1 spray application tool is a 1 quart, internal mix, siphon feed spray gun designed to deliver high solids vibration damping and thermal control coatings. The SG-1 features an aluminum 1quart cup and 0.5” interior diameter draw tube to ensure maximum material flow.

More Information >>