Zeronoise offers a wide variety of damping products ideal for sheet metal, plastic, fiberglass and wood.

Please feel free to contact our technical support department should you have any questions or comments regarding the installation or application of these products.

VB-1X
Liquid Vibration Damping Compound

VB-1X is an air curing, liquid damping compound. Its combination of silica-mica, ceramics and an advanced chemical binder greatly reduces structural resonance by converting vibration into “viscous” friction or low level heat.

Our VB-1X vibration damping compound may also be applied to the inside of loudspeaker enclosures whether fiberglass, plastic or wood to increase overall output by 1 to 1.5db.

More Information >>

VB-2
Thin Vinyl Damping Sheet

VB-2 is a flexible, odorless and lightweight mineral filled vinyl-copolymer formulated to handle the demanding extremes of aircraft vibration and noise control. It has twice the damping and less than half the weight of asphalt damping materials and the ability to handle continuous temperatures to 250 degrees.

More Information >>

VB-2HD
Thick Vinyl Damping Sheet

For heavy duty damping requirements VB-2HD is the perfect material. At a mere .43 pounds per square foot VB-2HD out damps other materials that are up to 4 times heavier.

More Information >>

V-MAX
Aluminum / Butyl Damping Sheet

These durable damping pads are constructed of an advanced, lightweight, non-curing butylene rubber bonded to a thin layer of black aluminum.

More Information >>

VB-FD
Fiberglass Damper / Interlayer Damper

VB-FD is a revolutionary damping material engineered to be inserted in between the multiple layer of a composite construction. By creating "pockets of differing density", structural resonance and vibration is dramatically reduced.

More Information >>

VB-1S PRO
Aerosol Vibration Damping Compound

VB-1S PRO allows you to apply a high quality, liquid damper to any clean surface with no overspray and no special tools.

More Information >>

SG-1
Spray Application Tool

The SG-1 spray application tool is a 1 quart, internal mix, siphon feed spray gun designed to deliver high solids vibration damping and thermal control coatings. The SG-1 features an aluminum 1quart cup and 0.5” interior diameter draw tube to ensure maximum material flow.

More Information >>

V-MAXAPP
V-MAX Application Tool

The V-MAXAPP tool makes installing the V-MAX vibration damping sheet easier than ever. The V-MAXAPP tool is constructed of soft plastic and has been designed to ensure a good bond between the V-MAX material and the vibrating surface.

More Information >>